5 ways to operate the conveyor safely and effectively
03-04-2022 473
Conveyor belt is a chain system widely applied in production units, they help save labor costs and increase labor productivity. However, when working with conveyors, it is important to pay attention to the rules and regulations.
Mục lục
Conveyor belt is a chain system widely applied in production units, they help save labor costs and increase labor productivity. However, when working with conveyors, it is important to pay attention to the rules and regulations. So how to operate the conveyor safely and effectively, research with Intech Vietnam in the article below.
Grasp the conveyor operating rules to help the working process take place quickly and safely. As conveyor operations require a combination of people, updating safety policies and regulations is essential.
Some safety regulations to mention are as follows:
1. Do not sit, stand or walk on the conveyor belt.
2. Make sure that the conveyor controls are working correctly.
3. Keep away from hair, clothes, jewelry and other items.
4. Check that all conveyor guards are in place.
5. Be careful with pinch points.
6. Alert management of any potential safety or operational concerns.
7. Follow the card lock/withdrawal process.
8. Only authorized persons are allowed to operate or maintain the conveyor belt.

You need to be proactive in all situations that arise and know how to stop the conveyor in an emergency. Warning signs and safety information should be prepared, and the work area around the conveyor should be free of debris or obstructions.
In particular, you also need to stay focused when working with conveyors, watch out for things that can cause danger, eye observation is really important. Especially when there are warning sounds appear, it is necessary to quickly stop and keep a distance from the conveyor belt, and then check if there is any problem.
.jpg)
Make sure you always wear the right protective equipment for the work area: Hard hat, safety shoes, gloves; Make the dress neat. Although conveyor belts are used to lift or move goods, you still need to keep in mind health and safety precautions..jpg)
Putting too much load on a conveyor can cause material to spill to the sides and build up around the conveyor, increasing the risk of heat and possibly damage to equipment. Using more than the allowable payload can only help to transport a few lines faster, but it can bring problems with much more serious consequences.
Conveyor belts should always be kept clean, preventing material from accumulating on the rollers and the area below adjacent to the tail of the conveyor to help prevent accidents and injuries. Always keep the habit of cleaning the conveyor area before and after operation, lubricating grease will help prolong the life of the conveyor belt. If you find any problems with the conveyor, call a support specialist.
Related Posts:
5 ways to operate the conveyor safely and effectively
Training on how to operate the conveyor
Grasp the conveyor operating rules to help the working process take place quickly and safely. As conveyor operations require a combination of people, updating safety policies and regulations is essential.
Some safety regulations to mention are as follows:
1. Do not sit, stand or walk on the conveyor belt.
2. Make sure that the conveyor controls are working correctly.
3. Keep away from hair, clothes, jewelry and other items.
4. Check that all conveyor guards are in place.
5. Be careful with pinch points.
6. Alert management of any potential safety or operational concerns.
7. Follow the card lock/withdrawal process.
8. Only authorized persons are allowed to operate or maintain the conveyor belt.

Conveyor operations need to adhere to certain rules before, during and after use.
Always stay active
You need to be proactive in all situations that arise and know how to stop the conveyor in an emergency. Warning signs and safety information should be prepared, and the work area around the conveyor should be free of debris or obstructions.
In particular, you also need to stay focused when working with conveyors, watch out for things that can cause danger, eye observation is really important. Especially when there are warning sounds appear, it is necessary to quickly stop and keep a distance from the conveyor belt, and then check if there is any problem.
.jpg)
When using the conveyor, it is necessary to always keep an active state to ensure safety.
Always wear protective gear
Make sure you always wear the right protective equipment for the work area: Hard hat, safety shoes, gloves; Make the dress neat. Although conveyor belts are used to lift or move goods, you still need to keep in mind health and safety precautions.
.jpg)
Wear protective gear when working with conveyor belts
Do not exceed the allowable load
Putting too much load on a conveyor can cause material to spill to the sides and build up around the conveyor, increasing the risk of heat and possibly damage to equipment. Using more than the allowable payload can only help to transport a few lines faster, but it can bring problems with much more serious consequences.
Maintain and maintain conveyor belts regularly
Conveyor belts should always be kept clean, preventing material from accumulating on the rollers and the area below adjacent to the tail of the conveyor to help prevent accidents and injuries. Always keep the habit of cleaning the conveyor area before and after operation, lubricating grease will help prolong the life of the conveyor belt. If you find any problems with the conveyor, call a support specialist.
Related Posts:
- What is industrial automation? Types of industrial automation
- Robots for picking, packing and unloading
- Technologies that will dominate manufacturing in 2022