Steps for Conveyor Maintenance
31-03-2022 645
Get ready to improve efficiency and eliminate repair costs when you perform regular conveyor maintenance.
Mục lục
Step 1: Check the entire conveyor system regularly
Scheduled inspections of conveyor systems are the best preventative maintenance possible. Testing helps to detect any problem areas at an early stage. In this way, worn or defective parts can be assessed and repaired before damage to belts or equipment occurs.
Step 2: Proper lubrication of conveyor drives and components
Lubrication is one of the most important maintenance activities for any machine. Sufficient and proper lubrication of all units in a conveyor system is essential to keeping conveyors in perfect condition. Operating conveyor systems without proper lubrication leads to damage and increases costs. Insufficient oil and lubrication can kill almost any piece of equipment or mechanical system. In fact, estimates of downtime costs due to poor lubrication are as high as 30% of a plant's total maintenance costs per year.
Step 3: Adjust conveyor tracking and prevent conveyor deviation
If there is any improper or misaligned belt tracking, it will do great harm to the whole system. The most important components of a conveyor belt require proper and regular maintenance. Conveyor belt tracking will reduce end-of-conveyor wear and product spillage.

Step 4: Belt maintenance
Belt life is completely dependent on regular care. Check that all sets are working and properly lubricated. Remove any excess build-up on the belt as they can cause major damage to the belt with prolonged exposure.
Inspect the loading area, where the product enters the conveyor, to check that the loading system is getting the product to the conveyor belt evenly and centered. Any conveyor is more susceptible to wear and tear if the product it transports is not centrally located or if not evenly distributed.
Next, test and run the conveyor by placing an item on top of it, if the movement of the items is not focused, use the slide to achieve the correct focused movement of the items. on the conveyor belt.
Step 5: Clean the conveyor belt
Last but not least, this step has great significance for conveyor performance. Proper removal of dust, dirt, and debris from a conveyor is the easiest rated maintenance activity for a conveyor. Wipe and clean dust particles or debris accumulated on conveyor surfaces. Use purified water to clean the conveyor during running. Only perform intensive cleaning when the conveyor is not in operation. This will allow you to clean perfectly even in hard to reach areas.
After inspection and maintenance steps, always remember to remove all tools and equipment from the conveyor and around the conveyor. These five steps will help you keep your conveyor belt in perfect condition for a long time. These tips will extend the life of the conveyor belt and the components attached to it. Get ready to improve efficiency and eliminate repair costs when you perform regular conveyor maintenance.
Related Posts:
- Spiral conveyors for the food industry
- Food processing automation solutions
- What are the benefits of using conveyor systems in the food industry?
- Advantages and disadvantages of different conveyor systems